Attention and maintenance of industrial dust collector for dust removal and environmental protection equipment
If the industrial dust collector is used for a long time, it will directly cause a lot of problems. Therefore, the maintenance of the equipment during the daily use is very important. Before the industrial dust collector is used, it is necessary to effectively open the cylinder cover to check whether the dust storage bag is truss.
The suction port of the industrial dust collector needs to be secure, and then the canister cap must be effectively covered, and its power supply voltage must be effectively checked. If necessary, pay attention to the forward and reverse rotation of the motor. Some industrial vacuum cleaners that use belt-type transmission in the equipment need to replace their conveyor of.
The industrial dust collector can effectively open the rear door of the vacuum cleaner for effective replacement. If the belt is loose in the equipment, you need to open the side door, and adjust and control the nut to the proper position.
There are many factors that need to be paid attention to when using industrial dust collectors. If ordinary equipment is strictly forbidden to use in flammable and explosive places, if non-special material filter bags can not absorb burning flames and ultra-high temperature waste, if there is no filter The use of cleaners is strictly prohibited.
If the filter on the industrial dust collector is damaged, it needs to be replaced in a timely manner. The equipment cannot be used continuously. The dust suction hose must not be crushed, stepped on, and worn out. The temperature of the equipment's rear casing Higher, especially after working for a long time, pay attention to burns.