澳门赌注网盘口

除尘设备厂家

categories of news

contact us

Company Name: Jiangsu Fengyu Environmental Technology Co., Ltd.

Contact: Mr. Sun

Phone: 0515-88421773

0515-88410181

Mobile: 13515145555

Email: 574889540@qq.com

Fax: 0515-88827772

Address: Bufeng Industrial Concentration Zone, Tinghu District, Yancheng City

Website: wangying88.com

technical analysis

Your current location : Home >> News >> Technical Analysis
  • Method for removing dust from uniformly distributed boards of dust removal and environmental protection equipment

    The core of this solution is to add a double dust cleaning device to the uniformly distributed boards of the dust removal and environmental protection equipment, that is, a vibration dust cleaning device and a brush cleaning device. The rapping dust cleaning device further includes a rapping driver and a rapping actuator. The brush-type cleaning device includes a cleaning driver and a cleaning actuator. An ash falling gap is provided between the lower end of the uniformly distributed plate and the inner wall of the casing. Uniform board
    Release time: 2019-09-20 Clicks: 43

  • Maintenance requirements for stand-alone dust collector

    Dust removal equipment is a very important equipment in the industrial production process and plays a vital role in environmental protection. As China's requirements for environmental protection have become more stringent in recent years, the governance of polluting companies has become stronger and stronger, and the market demand for dust removal equipment has increased. How to maintain the dust removal equipment in order to improve its working efficiency? 1. There are many models and classifications of dust removal equipment, each with their own
    Release time: 2019-09-01 Clicks: 46

  • How to use and maintain the dust removal equipment correctly?

    Many people are using dust removal equipment now, but must pay attention to regular maintenance and maintenance during use. The following is how to properly use the dust removal equipment with everyone. The first and most important point is that the user must operate the dust removal equipment in the correct way. You must read the instructions for use to thoroughly understand the principle, performance, and conditions of the dust collector. only
    Release time: 2019-06-30 Clicks: 42

  • What is the moisture requirement for sand and gravel separator?

    Sand and gravel separator I. Introduction In the production of the cement industry, in order to improve the efficiency of the grinding system and reduce the energy consumption of products, sand and sand grinding equipment is now commonly used. As an important part of the system, the performance of the powder separator directly affects the efficiency of the system. Therefore, the development of powder separator has been subject to various
    Release time: 2019-06-22 Clicks: 54

  • Let the dust removal equipment manufacturers tell you the features of the dust removal equipment!

    Let the dust removal equipment manufacturers tell you the features of the dust removal equipment! The foam acts on the dust through good covering, moistening, adhesion and other methods, effectively reducing the dust concentration on the mining face, greatly improving the working environment of the mining face, improving the working efficiency of underground workers, and effectively reducing the pneumoconiosis of frontline workers Incidence of disease. Foam dust suppression and other wet dust suppression
    Release time: 2019-03-30 Clicks: 36

  • Technical principles of classic dust removal and environmental protection equipment

    Technical principles of classic dust removal and environmental protection equipment The working principle of electrostatic precipitators: When a gas containing dust particles passes through a high-voltage electric field formed between a cathode line (also called a corona electrode) connected to a high-voltage DC power supply and a grounded anode plate Due to the corona discharge of the cathode and the gas is ionized, at this time, the negatively charged gas ions, under the action of the electric field force, move the sun plate, and
    Release time: 2019-03-23 Clicks: 23

  • Powder separator manufacturers explain the problems of efficiency and cycle load

    The classifier manufacturers explain the problems of efficiency and circulating load. The working condition of the classifier is important to the mill, which is mainly reflected by the cycle load rate, the classifier efficiency and the milling efficiency of the mill. First, the cycle load rate K: refers to the ratio of the return amount T of the powder separator to the finished product amount K = T / Q = (a'-c ') / (b'-a
    Release time: 2019-03-22 Clicks: 28

  • What are the equipment categories of dust removal equipment manufacturers?

    What are the equipment categories of dust removal equipment manufacturers? (1) Mechanical dust removal equipment includes gravity dust removal equipment, inertial dust removal equipment, centrifugal dust removal equipment, etc. (2) Washing type dust removal equipment includes water bath dust removal equipment, foam dust removal equipment, venturi tube dust removal equipment, water film dust removal equipment, etc. (3) Filter type dust removal equipment includes bag dust removal equipment and particle layer dust removal equipment
    Release time: 2019-03-21 Clicks: 28

  • Reasons Affecting the Effect of Pulse Bag Dust Collector

    Reasons affecting the effectiveness of pulse bag dust collectors for dust removal and environmental protection equipment (1) Selection of filter bags: Filter bags should be selected from abrasion-resistant and high-temperature-resistant materials, including fiberglass cloth / felt, Nomex, needle felt, P84 needle felt, etc. Considering the wear resistance, high temperature and cost of filter bags, the copper industry generally chooses NOMEX needle felts. (2) Temperature control: general filter bag
    Release time: 2019-03-20 Clicks: 20

  • What are the working principles of high-efficiency combined special powder separator?

    What are the working principles of the high-efficiency combined special powder separator? Let the powder separator manufacturer tell you! The working principle of the high-efficiency combined special classifier is: 1. The material to be milled enters the inner shell of the classifier from the upper hopper, and falls on the propeller spreading disc of the combined powder sorter integrated with the rotor. It is sprayed to the surroundings under the action of high-speed rotation.
    Release time: 2019-03-19 Clicks: 77

  • The working principle of the dust removal equipment Let the dust removal equipment manufacturers tell you!

    The working principle of the dust removal equipment Let the dust removal equipment manufacturers tell you! Pulse dust collector is mainly composed of upper box, middle box, ash hopper, air inlet equalizing pipe, support filter bag, blowing device, ash unloading device and so on. Dust-containing gas enters the ash hopper of each sub-chamber from the inlet air equalization pipe of the dust collector, and under the guidance of the ash hopper guide device, large particles of dust are separated and fall directly into the ash hopper, while the finer powder
    Release time: 2019-03-18 Clicks: 22

  • Attention and maintenance of industrial dust collector for dust removal and environmental protection equipment

    Attention and maintenance of industrial dust collectors for dust removal and environmental protection equipment If the industrial dust collector is used for a long time, it will directly cause a lot of problems. Therefore, the maintenance of the equipment in the daily use process is very important. Open the cylinder cover to check whether the dust bag is tight. The suction port of the industrial dust collector needs to be secure, and then the tube must be effectively covered.
    Release time: 2019-03-17 Clicks: 32

Total 14 12 Articles per page Pages: 1/2
2 下一页 尾页 1 2NextLast

手机二维码

contact us

Jiangsu Fengyu Environmental Technology Co., Ltd.

Contact: General Manager Sun Tel: 135-1514-5555

未标题-6.png

Address: Bufeng Industrial Concentration Zone, Tinghu District, Yancheng City




service

135-1514-5555

Service Hotline

Copyright © 2018 Jiangsu Fengyu Environmental Technology Co., Ltd.All rights reserved

  • online service
  • contact number
    13515145555
  • Leave message
  • Online consultation
  • online service
  • 电玩城游戏大厅 九五至尊网站是多少 网上棋牌手游大全 电子捕鱼平台 胜博发娱乐游戏 中文电子游戏官网 澳门网上境外赌博 最火的捕鱼游戏 上游棋牌大厅下载 正规棋牌游戏平台